Visually deficient working conditions and reduced work performance in office workers: Is it mediated by visual discomfort?

IntroductionThe main purpose of this cross-sectional study was to investigate whether visual discomfort acts as a mediating factor between perceived visual ergonomic working conditions and self-rated visual performance among office workers who carry out administrative tasks and computer-based work at the Swedish Tax Agency.MethodsA questionnaire was sent to 94 office workers addressing: 1) perceived visual quality of the visual display units; 2) prevalence of eye symptoms; and 3) self-rated visual performance. Eighty-six persons (54 women (63%), 31 men (36%), and 1 of unspecified sex) answered the questionnaire. Multiple regression analysis investigated the association between visual ergonomic working conditions and visual performance, both with and without visual discomfort as a mediator.ResultsThe group mean of the Indexed survey questions indicated a reasonably good quality of visual ergonomic working conditions, a relative absence of eye symptoms, and acceptable self-rated visual performance. Results from multiple regression analysis showed a significant association between perceived visual ergonomic working conditions and self-rated visual performance (r² = 0.30, β = 0.327, p < 0.01). When visual discomfort was used as a mediator, the association between perceived visual ergonomic working conditions and self-rated visual performance remained the same (r² = 0.32, β = 0.315, p < 0.01).DiscussionIt was remarkable to discover that self-rated visual performance was independent of visual discomfort. Possible explanations include exposure factors not included in the current study, such as dry air and sensory irritation in the eyes, psychosocial stress, time spent performing near work activities, or time exposed to visually deficient working conditions.Relevance to industryThe strong connection between satisfaction with visual ergonomic working conditions and productivity in this study has implications for workplace profitability and staff satisfaction. If productivity is enhanced by better visual ergonomic working conditions, then managers of workplaces may be able to improve work outcomes by optimizing the physical work environment.     

New environmental-friendly yellow pigments Y_(4-x)A_xMoO_(9+δ)(A =Ta,Tb)

A series of inorganic yellow pigments with general formula Y_(4-x)A_xMoO_(9+δ)(A = Ta, Tb), where x = 0,0.05,0.1,0.2, 0.4 for Ta and χ = 0, 0.005, 0.01.0.03, 0.05 for Tb,were synthesized by a conventional ceramic method at 1400 ℃ for 6 h in air. The samples were characterized by XRD,EDS,XPS,SEM,TG-DSC,UV-vis-NIR reflectance spectroscopy and CIE L*a*b* color scales. It is found that the substitution of A(A = Ta, Tb) for Y~(3+) in Y_4 MoO_9 decreases the NIR reflectance of the pigment samples, but the developed pigments Y_(4-x)A_xMoO_(9+δ)(A = Ta, Tb) still exhibit impressive NIR solar reflectance. The brighter yellow color of inorganic pigments Y_(4-x)A_xMoO_(9+δ)(A = Ta, Tb) is available when x is about 0.1 for Ta and 0.01 for Tb. The results make them a series of potential candidates as ecological yellow pigments because of their high reflectance, lightness, intense coloration and excellent thermal and chemical stability.     

Freeze-drying and mechanical redispersion of aqueous PEDOT:PSS

Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films are attracting famous applications in antistatic coating, energy storage and conversion, printed electronics, and biomedical fields due to their conductivity, optical transparency and flexibility. However, PEDOT:PSS has poor dispersion stability during long-term storage and transport. Moreover, the dried PEDOT:PSS films are insoluble in any solvent and cannot be redispersed again. In comparison to bake drying, here, a feasible strategy to achieve mechanically redispersed PEDOT:PSS with the help of freeze-drying process was reported. The redispersed PEDOT:PSS can recover not only the initial characters such as pH, chemical composition, viscosity, and particle size under similar solid contents, but also conductivity and surface morphology of treated films. In addition, the treated film exhibits self-healing properties similar to pristine film in terms of mechanical and electrical properties. This technology enables reuse and overcomes the technical problems of PEDOT:PSS dispersion, realizing real-time processing to meet variable applications.     

The effect of Nd3+ concentration on fabrication,microstructure, and luminescent properties of anisotropic S-FAP ceramics

Nd³⁺ doped strontium fluorophosphate (S-FAP), with chemical formula Sr₅(PO₄)₃F, nanopowders were prepared using the co-precipitation method. The prepared powders had no impurity phase with a grain size of about 30 nm and the doping limit of Nd³⁺ ions in strontium fluorophosphate is about 9 at.%. The morphology and particle size were determined by the doping concentration of Nd³⁺. Anisotropic Nd: S-FAP transparent ceramics with different Nd³⁺ doping concentrations were fabricated successfully by the simple hot-pressing method. The grain size of prepared S-FAP transparent ceramics decreased first and then increased with the increase of Nd³⁺ concentration. The 2 at.% Nd: S-FAP ceramic presented the highest optical transmittance at all wavelengths range. The characteristic transitions from the ground state to the excited states of Nd³⁺ ions were observed from the absorption spectra, and the absorption cross-section was calculated at 3.71 × 10^–20 cm². The influence of Nd³⁺ ion concentration on luminescence intensity and fluorescence lifetime was studied under 796 nm excitation. The strong emission of ⁴F_3/2→⁴I_9/2 transition in Nd: S-FAP was calculated by Judd–Ofelt (J-O) theory.     

Improving the corrosion resistance of a-C:H film by a top a-C:H:Si:O layer

During the deposition of a-C:H film, defects (pinholes or discontinuities) caused by excessive stress will inevitably appear, which will reduce the corrosion resistance of the a-C:H film. In this study, top a-C:H:Si:O layers (thickness of approximately 0.3 μm) on the surface of a-C:H films were deposited on a large scale by PACVD technology using acetylene (C₂H₂) and/or hexamethyldisiloxane (HMDSO) as reactants, to improve the corrosion resistance of a-C:H films while ensuring the appropriate overall hardness of the films. The corrosion behaviors of the films were studied by electrochemical impedance spectroscopy (EIS) and Tafel polarization. We found that the a-C:H/a-C:H:Si:O films possess a lower electrolyte penetration rate due to their stronger capacitance characteristics. In addition, the corrosion current density of the a-C:H/a-C:H:Si:O films (10^?10 A cm^?2) were reduced by 2 orders of magnitude compared to the a-C:H film (10^?8 A cm^?2), and by 3 orders of magnitude compared to 316 stainless steel (10^?7 A cm^?2). The impedance results obtained by EIS were simulated using appropriate equivalent circuits, and the corresponding electrical parameters were used to further verify the electrochemical protection behavior of the top a-C:H:Si:O layer.     

Evaluation of particle recovery from microalgae

Coccoliths are micro-structured biomineral particles found in cell protective covering layers of coccolithophore species. They are mainly composed of CaCO₃ and their individual crystal entities are arranged in such a way that they construct complex and unique structures. This complexity is found down to the individual particle level and appears to have promising properties to offer. This study focuses on the essential step prior to any kind of implementation, which is the recovery of the material. It summarizes cleaning protocols found in literature, compares them for the first time for the same freshly cultivated material and addresses challenges that still need to be overcome. Further, it highlight the advantages and disadvantages of the best cleaning protocols, suggests optimizations with promising results and uses size distribution measurements to analyse the recovery efficiency. To that end, further characterization techniques, new for coccoliths, are introduced and used to improve our current knowledge of the particles behaviour.     

Design and computational analysis of a metal hydride hydrogen storage system with hexagonal honeycomb based heat transfer enhancements-part A

In this study, design and performance analysis is carried out for a 10 kWh metal hydride based hydrogen storage system. The system is equipped with distinctive aluminium hexagonal honeycomb based heat transfer enhancements (HTE) having higher surface area to volume ratio for effective heat transfer combined with low system weight addition. The system performance was studied under different operating conditions. The optimum absorption condition was achieved at 35 bar with water at room temperature as heat transfer fluid where up to 90% absorption was completed in 7200 s. The performance of the reactor was observed to significantly improve upon the addition of the HTE network at a minimal system weight penalty.     

The effect of cognitive and affective aspects on usability

Studies on customer’s needs, desires and preferences have become highly important in the product design and development process. One consideration in usability is the cognitive aspect, which is related to the accommodation and evaluation of human cognitive capabilities, limitations and tendencies. In addition to the cognitive aspect, a recent study has shown that the affective aspect has been considered in the evaluation of product usability. Thus, both cognitive and affective aspects are deemed to be important for product design and the development process. Inherently, both aspects deliver complete human and product interaction and experience. However, studies that consider the affective process as a complement to the cognitive process for usability are relatively rare. To address this gap, this study discusses how an integrative framework of the cognitive and affective aspects can be applied to a product for usability assessment via empirical studies on e-commerce and e-learning platforms. The sample involved 230 respondents, using purposive sampling. The result shows that both cognitive and affective aspects have a significant effect, although with different weights. The affective aspect has been shown to improve product usability and user’s acceptance.     

Numerical verification of the continuous calculation method for tip stress during the driving process of the dynamic penetration test

This paper presents a calculation method for obtaining the continuous variation in stress between the tip and the soil during dynamic penetration tests, particularly in the case of using the Panda 3® penetration testing device. The originality of the method is that the tip stress can be computed continuously throughout the driving process. For each impact of the hammer on the penetrometer, data are recorded by sensors located at the top of the apparatus. Then, the stress at the tip and the displacement of the apparatus are calculated with a method based on the propagation of waves in the device. A three-dimensional numerical model of the penetration test, based on the Panda 3® specifications and using the discrete element method (DEM), is proposed in this paper. The purpose of the simulations is to validate the calculation method by comparing the curves of the tip stress versus the penetration distance obtained in two different ways, the first being the distance directly observed at the tip and the second being the distance calculated from the data recorded at the top of the penetrometer, as with the experimental device. The entire apparatus is represented, including the hammer, the rod, and the tip, and is driven into the model soil. The calculation method is applied, and the results are compared to the actual response of the soil to the driving of the penetrometer directly at the tip, which can be obtained with the numerical model. The responses are found to be very similar, confirming the theoretical framework and its underlying assumptions. This method is applied to dynamic penetration tests and provides the opportunity to obtain mechanical parameters other than the tip resistance from the tests.     

Sintering,microwave properties,and circulator applications of textured Sc-substituted M-type ferrite thick films

Sc³⁺ substituted M-type ferrites are effective microwave magnetic materials with a ferromagnetic resonance frequency in the range of 20 GHz–50 GHz. We report on the fabrication of oriented ferrite thick films as microwave components for application in the K_a-band at 30 GHz. Films of BaFe_11.5.Sc_0.5O₁₉ were prepared by screen-printing on alumina substrates, drying in an external magnetic field, and sintering at 900 °C. Low-temperature sintering is achieved through use of a mixed BBSZ/CuO sintering aid. A strong anisotropy of the sintered ferrite films is revealed by XRD analysis. Microwave properties of the films were determined in a coplanar waveguide setup. The ferromagnetic resonance frequency of the films is at 30 GHz and the textured films possess good nonreciprocal properties which scale with film thickness. The films were tested in a Y-junction circulator, and represent promising materials for self-biased microwave components fabricated in thick film technology.